When a Property Needs a Final Clean
High to Low
Dust Settles, So Work Down
A sparkle clean is the last cleaning stage on an empty property, done after the building work and any heavy cleaning are finished and before handover, viewings or the first occupants. It is a presentation clean, not a rescue. Our specialist team works from high to low so settled dust is not disturbed again. It dusts surfaces, wipes fixtures and fittings, finishes glass and mirrors, detail-cleans kitchens and bathrooms and does the floors last. It does not remove construction debris, paint splashes or adhesive: that is a builders clean. It does not reset a whole property after a tenancy: that is an end of tenancy clean, or a deep clean. The areas are agreed in a written quote before the visit, each is checked against it before sign-off, and before-and-after photos show the result.
Dust Settles, So Work Down
Checked Room by Room
Fine dust is the main job after building work, so the team starts with HEPA-filtered vacuums, which hold fine dust instead of blowing it back into the room. Glass and polishing equipment finishes mirrors and reflective surfaces, and surface tools and finishing products do the fixtures. Equipment and products are included on every contract.
Four Things We Set Out on Every Job
A sparkle clean is the last job before a client walks in, so there is no room for a second visit. These are the four things we set out on every one.
The people who arrive are directly employed and trained for the job. A finishing clean depends on small details, such as the right product on each surface, so the person doing it needs to know the work.
We operate with full insurance cover and recognised industry accreditations, delivering deep cleaning services in line with professional and safety standards.
Each room is checked against the agreed scope before we leave, and anything missed is put right on the same visit. Before-and-after photos go with the sign-off.
The date is set by your handover, not ours. We work evenings and weekends where the programme needs it, and plan back from the day the keys change hands.
Cleaning and facilities management for London businesses since 2001. Tell us the address and the handover date, and we will arrange a survey.




The survey or photos tell us the size of the property, the finishes and how much is left to do, and that sets the price and the time on site. The four steps below are the same on every job.
If your property requires additional cleaning beyond this service, our specialist teams provide a range of professional solutions.
What project managers, landlords and facilities teams ask before booking a final clean.
A sparkle clean is the last cleaning stage on an empty property, carried out once building work and any heavy cleaning are finished. Our specialist team dusts surfaces and fixtures, finishes glass and mirrors, detail-cleans kitchens and bathrooms and does the floors last, so the space looks ready when a client, tenant or buyer walks in. It is a finishing pass with a light touch. It does not clear construction debris, paint splashes or adhesive, and it is not a full reset of a lived-in property. Your quote names every area included.
An end of tenancy clean covers a whole property after a tenant leaves: kitchens, bathrooms, cupboards, floors and the wear of a full tenancy. A sparkle clean is narrower. It is a presentation pass on an empty property that is already broadly clean, taking off settled dust, marks and smears. It often follows a builders clean or a deep clean, while an end of tenancy clean is the main clean once someone moves out. If a property is dirty rather than dusty, it needs the heavier service first, and the sparkle clean comes after.
Yes, provided the property is empty. We carry out sparkle cleans in offices, shops, flats and houses, and in spaces just refurbished or newly built, across London. The order of work is the same each time: high to low, then floors. What changes is the scope. A commercial fit-out may have a lot of glass and partitions to finish, a flat has kitchen and bathroom detail, and a house may have several floors. The survey or photos show which, and the written quote lists the areas. A property still in use is better suited to a deep clean.
Still need help? Email info@bayleaffm.com
After all building, decorating and heavy cleaning is finished, and as close to handover as the programme allows. Cleaning too early means dust from later trades settles on finished surfaces and the work has to be repeated. A usual order is builders clean first, then sparkle clean, then handover, viewings or the arrival of occupants. Where a snagging inspection is planned, many project managers have the finishing clean done just beforehand so that finishes can be judged clearly. Give us the handover date at quote stage and we plan back from it.
Sometimes. It depends on the team's availability and on what is known about the property, so a date cannot be promised in advance. A handover moving forward is a common reason to ask. What helps most is the address, the areas, the floor types and the date the property will be empty with the trades gone. With photos or a survey we can say what is realistic and put it in the written quote. Visits can also be arranged in the evening or at a weekend.
Still need help? Email info@bayleaffm.com
Yes. A sparkle clean is done in a vacant property: no furniture in the way, no staff or residents and no trades still working. Dust and marks can only be finished properly when nothing else is moving through the space, and a clean surface touched again by another trade has to be redone. If some furniture is still in place, tell us when you book so we can note what will be worked around. Occupied or still-in-use space is usually a deep clean job rather than a sparkle clean.
Yes, and nothing is charged separately for it: products, equipment and uniforms come with every contract. The kit covers HEPA-filtered vacuum systems for fine dust, glass and polishing equipment for mirrors and glazing, plus surface tools and finishing products for fittings. From you we may need a way into the building, a working water supply and power. Mention at quote stage if either is switched off, which can happen in a building only just finished.
Still need help? Email info@bayleaffm.com
Yes. Main contractors, developers and fit-out teams use it as the last step before a unit, floor or building is handed to the client. It follows the builders clean, which takes off construction dust, debris and residue, and prepares the space for the client's inspection. Because a handover date is usually fixed, the areas and the visit date are agreed in writing in advance. Before sign-off the supervisor walks each area against that scope, and before-and-after photos give the project team a record to send on with the handover paperwork.
Yes, as far as cleaning goes. The aim is that the property can be occupied the next day with nothing left to dust, wipe or polish. Before leaving we compare every room with the written scope, and anything missed is put right on the same visit. A sparkle clean does not cover other things that decide readiness, such as snagging repairs, repainting, clearing building rubbish or fixing damaged finishes. Those belong to the contractor first, and a builders clean deals with construction residue.
Still need help? Email info@bayleaffm.com
Reviewed by Harry Aedy, Specialist Services Team Leader, Bayleaf Facilities Management.
First published 19 March 2026 · Last updated 16 October 2026
Bayleaf FM has cleaned London commercial property since 2001. ISO 9001:2015 and ISO 14001:2015 certified under Citation certificate 460282024, valid to 13 August 2028.